This is the pinnacle of detailing services for your car’s exterior. If you are looking to enhance the gloss of your cars paint or remove them unsightly swirls and scratches then this is achievable with our paint correction and enhancement (machine polishing) services. We use different grades of abrasive polishes and pads along with our modern day polishing techniques and equipment to achieve the best finish possible from the packages we offer below.

Machine polishing – Due to different finishes in modern day paints, paint enhancement and correction services are priced on an hourly basis and will require an inspection of the vehicles paint condition before being able to provide an approximate quote.

Paints that are soft (Japanese cars) tend to correct easier but takes time to refine, whereas some vehicles which have hard ceramic clear coats (European) will take more time to penetrate the clear coat. Dark and/or solid coloured paints require more time as more refinement is needed to achieve a hologram free finish than lighter metallic paints.

Below is an approximate guide to how much time is required to carry out each service based on a small hatch sized vehicle with light coloured paint.

Stage 1 Enhancement
Recommended for newer vehicles or if you’re looking to enhance the finish of your cars paint. Will remove/reduce fine swirls and hazing and restore paint to a slick and smooth finish.
– Pre foam & full exterior wash
– Paint Clayed (to remove paint contaminants)
– Trims and rubbers taped up
– Stage 1 machine polish
– Alcohol wipe down
– Windows cleaned
– Tyres & Trims treated
– Hand application of wax/sealant (Optional coatings available at additional costs)
Time : 4 -5 hours (approx)

Stage 2 paint enhancement/correction
Stage 2 paint enhancement will remove or reduce light to mild swirls and scratches by 60-80% and improve the paints gloss and clarity. This is the minimum recommended for dark and solid coloured vehicles.
– Pre foam & full exterior wash
– Paint Clayed (to remove paint contaminants)
– Trims and rubbers taped up
– Stage 2 machine polish
– Alcohol wipe down
– Windows cleaned
– Tyres & Trims treated
– Hand application of wax/sealant (Optional coatings available at additional costs)
Time : 6 – 12 hours (approx)

Full paint correction
Recommended if you are seeking a defect free paint finish and ultimate clarity and reflections. We can remove or reduce as much paint defects as possible whilst still leaving a safe amount of clear coat on the paint to prevent any oxidation or fading further down the track. This is achieved through a 3-5 stage machine polishing process.
– Pre foam & full exterior wash (2 washes before and after correction)
– Paint Clayed (to remove paint contaminants)
– Trims and rubbers taped up
– 3 – 5 Stage machine polish
– Alcohol wipe down
– Windows cleaned
– Tyres & Trims treated
– Hand application of wax/sealant (Optional coatings available at additional costs)
Time : 12+ hours (approx)